No welding, ever. The 4Runner sliders are 100% bolt-on using factory frame holes — no drilling at all. The Tacoma sliders are bolt-on with minimal drilling: two holes per side. All Grade 10.9 mounting hardware is included with both.

Our 4Runner rock sliders fit most 2010–2024 Toyota 4Runners (5th Generation). They do not fit the Limited trim or the 2022 Sport. On 2010–2013 models, the lower cladding must be removed before installation.

Our Tacoma rock sliders fit 2005–2015 (2nd Gen) and 2016–2023 (3rd Gen) Toyota Tacomas, in both Access Cab and Double Cab configurations. Installation requires drilling two holes per side.

Real rock sliders. They're built from .120" wall DOM (drawn-over-mandrel) steel tubing with .188" gusseted frame mounting plates, designed to take direct rock impacts and support the weight of the truck. The step function is a bonus — frame and rocker protection is the job.

DOM (drawn-over-mandrel) tubing starts as electric-welded tube that's then cold-drawn over a mandrel, which refines the weld seam and produces more uniform, stronger walls. Cheaper sliders often use plain HREW tubing, which is more prone to folding under point impacts. We use .120" wall DOM exclusively.

Every listing is for a pair — driver and passenger side — with all mounting hardware included. Each slider weighs about 65 lbs with step plates fitted.

Yes. The step plates are removable, so you can paint, powder coat, or wrap them in any color and bolt them back on. It's an easy way to match the sliders to your build.

Every set gets a dual-layer finish: an e-coat base that seals the bare steel, topped with powder coat. That combination resists rock rash, road salt, mud, and UV far better than paint alone.

In-stock sliders ship in 2–3 business days. Because each set weighs around 130 lbs, they ship freight — you'll receive tracking as soon as your order leaves the shop.

Basic hand tools: a socket set, torque wrench, and a jack. For the Tacoma sliders you'll also need a drill for the two holes per side. A second set of hands (or a jack to support the slider during mounting) helps — each slider is about 65 lbs. No welding on either platform.